Makita HM1211B Specifications:
o Blows/min.(BPM) 2000
o Impact Energy 14.2
o AMPS 10.0
o Bit type 3/4" Hex

Makita HM1211B Includes:
o Hex wrench (#4; 783202-0, #8; 783210-1)
o Plastic tool case (150589-9)

Makita HM1211B Features:
o Accepts commonly used 3/4" steel
o Powerful 10 AMP motor (2,000 BPM) for fast and efficient operation
o Comfortable rubber D-shaped grip side handle absorbs vibration; secures in four positions for operator convenience in any position
o One touch latch bit retainer for quick bit changes
o Automatic brush cut-out when periodic servicing is due
o Factory grease packed for reduced maintenance

o Powerful 14.0 AMP motor to handle the most demanding applications
o Constant Speed Control automatically applies additional power to the motor to maintain consistent speed under load for the most challenging jobs
o Soft Start suppresses start-up reaction for more control and better accuracy
o Variable Speed control dial enables user to match the speed to the application for greater versatility
o L.E.D. Service Light notifies the user approximately 8 hours before the brushes need to be replaced
o L.E.D. Power Lights indicate switch failure or cord damage
o Makita Motor Advantage includes field core interlocking steel laminations, dual ball bearing armature, and large surface commutator with the highest quality raw materials, resulting in efficient transfer of energy for greater power
o Extended Life Brushes are longer for more work between service intervals and less downtime
o Automatic Brush Cut-Off protects commutator from damage for longer tool life
o Durable blow-molded rolling tool case for safe storage and easy transportation
o "No hammering when idling" helps increase tool life
o Rubberized ergonomic soft grip provides more comfort and control
o Easy-to-operate slide switch increases productivity and allows for continuous use
o Side-handle swivels 360? for greater control
o Accepts commonly used 1-1/8'' Hex steel

Makita HM1812 32Kg AVT Hex Shank Electric Breaker

Makita once again leaps to the head of the performance league table for mighty 32kg electric breakers with the new HM1812. It sets best-in-class standards with a 60% increase in impact energy at 73 joules and a 25% reduction in vibration to just 6.5m/s2.

The HM1812 introduces a new vibration damping system that effectively separates the impact generation from the motor housing, once again cutting vibration ratings and produces a remarkable 4 hours 43 minutes of useable work time to reach the Exposure Limit Value.
FEATURES

60% increase in impact energy to 73 joules
25% reduction in vibration to just 6.5m/s2
4 hours 43 minutes run time to ELV
Vibration absorbing housing
Counterweight mechanism reduces vibration when chipping
"Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body
Soft start
LED's indicate when to replace carbon brush
Ergonomic soft grip
Highly durable switch
High power
Name plate and serial label positioned where it will be free from scratches and damage
Compatible with D-54972 Hammer Trolley
Connectable to dust extractor

The Makita 3/4 in. 2-Speed Hammer Drill has variable-speed operation to help with starting holes in concrete and steel. Start with low gear for speeds up to 900 RPM and 18,000 BPM. Then switch to high to take advantage of up to 2,300 RPM and 46,000 BPM. The 1/2 in. keyed chuck is powered by a 6 Amp motor and ball bearings translate to years of dependable use. This hammer drill also has adjustable side handles and a depth gauge for drop-in anchors. It comes with a storage case.

Powerful 6 AMP motor for the most demanding applications
2-speed (0-900 & 0-2,300 RPM) with speed control switch
2-mode operation for "Rotation Only" or "Hammering with Rotation" for multiple applications
Variable speed switch for easy starting of holes
All-ball bearing construction for longer tool life
Adjustable side handle for greater control
Depth gauge for "drop-in" type anchors
Recessed lock-on button for continuous use
Lightweight (6.4 lbs.) for reduced operator fatigue
Double insulated

CXT HAMMER DRIVER DRILL 12V

COMBO KIT HR007GZ 191J612

The Makita HR010GZ01 40v Max XGT rotary hammer is a powerful and versatile tool designed for demanding tasks. This 20mm SDS-PLUS combination hammer, powered by a 40v Max XGT battery, delivers robust performance with 2.1J of impact energy. Its compact and lightweight design ensures excellent manoeuvrability and is compatible with the new dust collection system DX16, making it ideal for a wide range of drilling and chiselling tasks.

Enhanced with user-centric features, the HR010GZ01 includes a built-in LED light to illuminate work areas and a battery protection circuit to prevent overloading, over-discharging and overheating. The innovative Auto-start Wireless System (AWS) connects the tool to compatible vacuum cleaners via Bluetooth, promoting a cleaner and more efficient work environment.

Backed by Makita's reputation for durable and reliable professional tools, the HR010GZ01 is adapted for SDS-PLUS bits and its brushless motor promises a longer lifespan with less maintenance. This model redefines the standards for heavy-duty cordless rotary hammers, offering the power and flexibility needed for various applications.
What's Included?

HR010G 40v Max XGT Brushless Rotary Hammer
413N42-3 Depth Gauge
422992-7 Sealing Cap
MakPac 4 Carry Case + Inlay

INCLUDES:
o (1) Side Handle (451749-9)
o (1) Depth Gauge (331886-4)
o (1) Tool Case (824695-3)

FEATURES:
o Powerful 7 AMP motor delivers 2.1 ft.lbs. of impact energy to handle the most demanding applications
o Anti-Vibration Technology (AVT(R)) is an internal counterbalance system that greatly reduces vibration by moving a counterweight in the opposite direction of drive piston
o Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
o Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
o L.E.D. light illuminates drilling surface for more productivity in low light applications
o Recessed hammer function selector located below gear housing for improved durability
o Variable speed trigger enables user to match the speed to the application for greater versatility
o 3-mode operation for various applications with "Rotation Only", "Hammering with Rotation" or "Chipping Only" functions
o 40 bit angle settings allow the bit to be set at different positions for operating convenience
o Ergonomic "Pistol-grip" handle with rubberized soft grip for increased comfort
o "No hammering when idling" function helps increase tool life
o Designed to reduce dust exposure in drilling applications with dust extraction accessory (part no.195173-3)

SPECIFICATIONS:
o Amps: 7
o Capacity (Concrete Drilling): 1"
o Capacity (Concrete Drilling w/ Core Bit): 2-11/16"
o Impact Energy (Joules): 2.9 J
o Impact Energy (ft. lbs): 2.1
o Vibrations (m/s2): 11.5
o Blows Per Minute (Variable Speed): 0 - 4,600 BPM
o No Load Speed (Variable Speed): 0 - 1,200 RPM
o Overall Length: 15-1/8"
o Cord Length (ft): 13.1'
o Bit Type: Accepts SDS-Plus
o Sound Rating (Decibels): 90 dB (A)


The Makita 1 in. AVT rotary hammer (model HR2611F, with pistol-grip) is engineered with anti-vibration technology (AVT(R)), an internal counterbalance system for significantly less vibration. The HR2611F combines performance and power with less vibration in a compact size, and is ideal for a range of applications including overhead drilling. The HR2611F has a 7 AMP motor that delivers 2.9 joules (2.1 ft. lbs.) of impact energy to handle the most demanding applications. The 3-mode operation offers rotation only, hammering with rotation or chipping only for multiple applications. Modes can be easily changed with a recessed hammer-function selector, which is located below the gear housing for improved durability. The LED light at the base of the tool's pistol grip illuminates the work surface in low-light conditions. The HR2611F is engineered for a range of applications including overhead drilling into concrete, wood and metal, removing tile, and more. It is ideal for a range of trades including masons, plumbers, electricians, sprinkler installers, city maintenance crews, and general contractors seeking a best-in-class 1 in. rotary hammer.

Makita SDS-Plus Rotary Hammer HR3001CJ/1 110V 30mm

FEATURES:
o Powerful 11 AMP motor delivers 8.4 ft.lbs. of impact energy to handle the most demanding applications
o Anti-Vibration Technology (AVT(R)) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5m/s2
o Air actuated counterbalance directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the drive piston actively reducing vibration
o Vibration absorbing housing features a spring loaded main handle and upper housing that move independently of the motor and drive mechanism effectively isolating most of the vibration away from the user
o Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
o Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control for more convenient operation
o Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
o Soft start suppresses start-up reaction for more control and better accuracy
o L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
o L.E.D. power light indicates switch failure or cord damage
o Variable speed control dial enables user to match the speed to the application for greater versatility
o Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
o Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
o Automatic brush cut-off protects commutator from damage for longer tool life
o 2-mode operation for "Chipping Only" or "Hammering with Rotation"
o 24 bit angle settings allow the bit to be set at different positions for operating convenience
o One-touch sliding chuck for quick bit changes

Features

Powerful 1,510 W motor delivers 19.1 J of impact energy to handle the most demanding applications
Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control
Soft start suppresses start-up reaction for more control and better accuracy
Depth gauge for increased drilling consistency
LED power light indicates switch failure or cord damage

MAKITA COMPACT P WASHER(1450P)

Makita JN1601 Includes

Wrench (781028-4)
Hex Wrench (783208-8)

Makita JN1601 Features

Clean and precise work in keystone plate, deck plate and other corrugated sheet materials
Die rotates 360?
Large 1/4" stroke
Ergonomic, slim body design for easy gripping
Extremely light (weighs only 3.6 lbs.) for easy handling
Lock-on sliding switch for continuous operation
Built-in thickness gauge for convenience
Easy punch and die replacement for reduced down time
Double insulated

Makita Reciprocating Saw (model JR3051T) delivers superior power and performance with less vibration. The JR3051T is powered by a 12 AMP motor with electronic speed control to maintain constant speed under load. The JR3051T has a long 1-3/160 stroke for faster cutting with 0-3,000 strokes per minute (SPM) and a variable speed trigger to match the speed of the saw to the application.

The JR3051T has a durable body design that keeps dust and debris away from the motor, with rubber and felt seals to keep dust and water out for a longer tool life. The JR3051T weighs 7.3 lbs., with tool-less blade change.

The JR3051T is a versatile and powerful reciprocating saw engineered for demolition, metal cutting, wood cutting, drywall and plaster, plastics and remodeling. It0s ideal for builders, roofers, metal fabricators, remodelers, and general contractors seeking a best-in-class industrial quality reciprocating saw.

POWER : Powerful 15 AMP motor
delivers 3,800 RPM for superior
performance
CONVENIENCE : Adjustable spark
guard designed to divert sparks
PRECISION : Fence adjustment up
to 450; adjusts to 3 locations
for various material
sizes
CAPACITY : Large cutting
capacity; cuts up to 5" round
and 4" x 7-5/8" rectangular
INCLUDES : Abrasive wheel,
wrench